BURRIS MOTOR MOUNT ALUMINUM 15 Degree New lightweight design with lower engine height. Super gold anodized high tech looks. Fits Briggs 5hp, Tecumseh Stars, and all F200 engines. 15-degree. Three point slotted mounting of the slider to the base. This allows for instant engine repositioning as well as a more structurally ridged package. Lightweight billet steel CNC machined clamps to eliminate flex and loosening. Includes aircraft quality hardware. Available in International (wide) and American (narrow) spacing.
MyChron 3 or MyChron 4 RPM Lead Assembly NEW FITS MyChron 2, 3 or 4 RPM Lead Assembly NEW Need a replacement? We have just what you need! Call 260-557-8709 if you need help with mychron products
Price: $24.99
MyChron 4 -2-Temp Kart Tach With Receiver-RPM MyChron 4 -2 T Kart Tach With Magnetic or Infra Red Receiver-RPM (You Can Hook Up Two Heat Sensors at the Same Time With this Unit)
Comes with your choice of H20 10mm, CHT or EGT
Price: $545.00
MyChron 4 Kart Tach, Beacon And Data Key ON SALE TWO WEEKS ONLY 1- MyChron 4 with Infra Red Receiver (your choice of heat sensor CHT, H20 or EGT) 1- Infra Red Beacon 1- Data Key and Software (So you can down load your race data into your computer, and also get updates on line for your unit from Aim Sports.. )
Price: $515.00
MyChron 4 Kart Tach, MyChron GPS And Data Key 1- MyChron 4 with your Choice of Infra Red or Magnetic Receiver (your choice of heat sensor CHT, H20 or EGT) 1- MyChron GPS 1- Data Key and Software (So you can down load your race data into your computer, and also get updates on line for your unit from Aim Sports.. )
MyChron MXL Pro Auto Tach Gauge MXL Pro: Overview
The MXL Pro is a digital dash, gauge, and data logger featuring a tachometer, RPM input, 12 analog inputs, 4 speed inputs, CAN/serial ECU connector, CAN protocol for external expansion, gear position indicator (sampled or calculated), internal lateral G sensor, and lap timer. With standard features including a wide, fully configurable display, six configurable alarm LED’s, backlight, and USB connector, the MXL is a stylish, powerful unit that re-defines the state of the art in data acquisition for performance vehicles. Street Smarts The MXL Pro can be interfaced (via CAN or RS-232 serial) with a variety of vehicle ECU's (engine control units) including MoTec, Pectel, DTA, MBE, EFI, Seat, Autronic, Bosch, Racetech and Carmo. Or use the AMP connector and deploy a powerful array of sensors on your vehicle, including pressure, temperature, throttle, steering, suspension, speed, Lambda sond, and more. The additional CAN protocol allows the MXL Pro to interface with external expansion modules.
The lateral G sensor lets you create a map of the track when you download the data to your PC. This allows you to match up RPMs, gear positions and more to exact track positions to fine tune your driving. By adding brake position sensors, for example, you can monitor driving behavior and actually see where on the track the driver is braking, and much braking is applied. This is invaluable for driver training..
Price: $2,879.00
MyChron MXL QM Dragster Data Aquisition Gauge The New MXL QM Dragster Data Aquisition Gauge
MXL QM has been engineered to help you increasing your dragster reliability and overall performance. After the great success of MyChron3 660, AIM makes a step forward. The new MXL QM, in fact, is a tool designed and developed for drag racers (as QM for quarter mile tells us) but with the potentials of a high tech logger as MXL, one of the world most successful data acquisition system, is. High performance digital dash with plenty of channels and the easiest connection to the most important ECUs on the market, based on eighth mile and quarter mile competition, MXL QM is specifically designed for Drag Races.
MXL QM starts with a manual switch - following NHRA rules - and stores runs and not laps.
It samples RPM, up to 4 speed inputs, up to 12 analogue channels and additional channels through ECU interface (via CAN bus or RS232). Moreover it can be easily configured using the dedicated DragOn software.
MXL QM can be interfaced (via proprietary CAN bus) with virtually infinite LCU-ONE as well as with DaVid. All data are stored in the 8 MB internal memory and can be downloaded to a PC through USB connection (using both the USB cable or the optional Data key). QMAn, the powerful software properly developed by AIM for this logger, lets you create your personal ET database and analyses performance data.
Data of an entire racing week-end can be reviewed directly on the wide backlighted display, for immediate evaluation of the most important measures. There is virtually no limit to the number of sensors you can connect to MXL QM: engine rpm, clutch rpm, driveshaft rpm, speed sensors, k-thermocouples, thermo resistors, pressure transducers for oil, water and brake, potentiometers, accelerometers, gyrometer.
Price: $2,179.00
MyChron MXL Strada Auto Tach Gauge MXL Strada: Overview
MXL Strada is a digital dash and gauge, comes with Download cable and standard wiring harness. The MXL Strada makes a statement on any street bike or performance street car -- anywhere you need style, accuracy, and reliability without the cost or complexity of a full data logging system. The MXL Strada is a digital dash and gauge, featuring a tachometer, RPM input, 8 analog inputs, 1 speed input, CAN/serial ECU connector, gear position indicator (sampled or calculated), and lap timer. The MXL Strada stores lap time data for on-board replay.
With standard features including a wide, fully configurable display, six configurable alarm LED’s, backlight, and USB connector, the MXL is a stylish, powerful unit that re-defines the state of the art in data acquisition for performance vehicles
MyChron3 Gold Auto Gauge MyChron3 Gold: Overview The MyChron3 Gold Auto is designed for racers who analyze their data on their PC. The MyChron3 Gold Auto has all of the features of the MyChron3 Plus Auto, with the addition of an internal lateral G sensor, more memory and up to 200Hz sampling and recording per channel. The lateral G sensor lets you create a map of the track when you download the data to your PC
BURRIS MOTOR MOUNT ALUMINUM 15 Degree New lightweight design with lower engine height. Super gold anodized high tech looks. Fits Briggs 5hp, Tecumseh Stars, and all F200 engines. 15-degree. Three point slotted mounting of the slider to the base. This allows for instant engine repositioning as well as a more structurally ridged package. Lightweight billet steel CNC machined clamps to eliminate flex and loosening. Includes aircraft quality hardware. Available in International (wide) and American (narrow) spacing.
Price: $99.99
Motor Mount-Flat, 5 and 15 Degree High quality, billet two piece, black anodized motor mount, with quick side to side adjusters. Available flat, 5 degree, and 15 degree. American and international spacing available. Fits Raptor, Animal, and World Formula. Made by Performance Mfg.
